Single door
Often direct-cool with a freezer compartment. Cooling, thermostat, door-seal and manual-defrost concerns are assessed according to the model.
APPLIANCE SERVICES
Keep the freshness going. Independent, chargeable support for out-of-warranty products. Visiting / diagnosis charges start at ₹500.
TYPES WE ASSESS
Often direct-cool with a freezer compartment. Cooling, thermostat, door-seal and manual-defrost concerns are assessed according to the model.
Many models use a separate freezer and frost-free system. Uneven cooling can involve airflow, a fan or the defrost system, not only refrigerant.
Multiple compartments, fans and controls require a clear description of which zone is affected. Water and ice functions add valves and supply lines where fitted.
Wide fresh-food storage and lower freezer layouts need careful seal and temperature checks. Share the model details during the call; no online upload is required.
SERVICE OPTIONS
Temperature behaviour, door closure, airflow and accessible condenser condition help narrow the cause. Compressor or refrigerant work is proposed only after checks.
Fans, sensors, heaters and defrost controls are checked for supported models. Thick ice should not be chipped off with sharp objects.
Poor seals can let warm humid air enter. We assess alignment, gasket condition and the control system before quoting.
Specialist diagnosis determines whether repair is practical. Refrigerant type, leak location, parts and appliance condition affect cost.
Drain pathways, water supply connections and ice-maker components are examined where fitted. Shut off the water supply if a connected line is leaking.
Clicking can have several causes; repeated starts or tripping need inspection. Avoid repeatedly switching the refrigerator on and off.
COMMON PROBLEMS
| What you notice | Safe first check | What needs assessment |
|---|---|---|
| Freezer cold, fridge warm | Avoid blocking interior air vents and check that doors close. | Airflow, evaporator fan or defrost faults may be involved. |
| Both compartments warm | Check the power supply and settings without opening any electrical cover. Protect perishable food. | Starting components, controls or the sealed system need assessment. |
| Water under the fridge | Check whether an external water line is leaking, if fitted. | Drain blockage, defrost-water overflow or a connection fault may be responsible. |
| Heavy frost | Make sure food packets do not prevent the door closing. | Seal leaks, moisture entry or defrost faults require diagnosis. |
ESTIMATED PRICES
Visiting / diagnosis charges start at ₹500. Repair work is quoted after inspection. Ask for labour, parts, refrigerant, transport, access work and applicable taxes to be explained before approval. Confirm the visit fee and whether it is adjusted against repair on the call.
| Service / work | Repair quotation |
|---|---|
| Drain / minor adjustment labour | Quote after inspection |
| Sensor, thermostat or fan labour | Quote after inspection |
| Defrost-system repair labour | Quote after inspection |
| Sealed-system repair labour | Quote after inspection |
MAKE THE VISIT MORE USEFUL
Tell us the door type, approximate age, model, which compartment is warm and how long cooling has been affected. Mention water/ice dispensers.
Keep ventilation clear, avoid blocking internal vents and inspect door closure. Follow the manual for defrosting and temperature settings.
Compare the likely repair cost, appliance condition, age, replacement cost and parts support. Read the comparison guide →
INDEPENDENT MULTI-BRAND SERVICE
Independent support repairs for the brands listed below. Model, parts and local availability must be confirmed by phone; some older or imported models may not be serviceable.
ONE CALL TO GET STARTED
Tell us what is happening. We’ll discuss the next step, the visit charge and availability before arranging a visit.